Furan is a highly flexible polymer, which can be made into many different materials.
Here’s how to make your own.
Heat up some silicone to 180C.
Add the resin and seal it in a bag.
Make sure the bag is tightly closed.
Melt some melted silicone and place in a microwave for 2 minutes.
Remove the bag and place the bag on a baking tray.
Melt the resin mixture in the microwave for 3 minutes.
Melt a little bit of the melted silicone, then add a bit of melted silicone to the melted resin mixture.
Microwave the mixture for 3 seconds and repeat for the remaining silicone.
Melt it again in the same way for another 3 seconds.
Pour the resin into the bag, seal it and microwave again for a minute.
Pour a little of the mixture into the plastic bag and microwave for a couple of minutes.
Add a little more silicone to seal the bag.
Microwset the resin for 1 second.
Repeat for the rest of the resin.
Pour some melted resin into a small bowl, stir well and pour the mixture on top of the silicone bag.
If you don’t have a fur sealer, you can make one from the disposable plastic bag.
Here is how to do that.
Place the fur sealant in the plastic bags and place it inside the bag for 10 minutes.
If it is clear, then you’re done!
You can test the sealant by placing a fur mask on the plastic to see if it has been sealed.
It should take about 5 minutes for the seal to set.
Once it has set, remove the plastic from the bags and allow the sealer to air dry.
You should be able to use the sealants for about two weeks.